bpx 63 silizium-fotodiode mit sehr kleinem dunkelstrom silicon photodiode with very low dark current 2001-02-21 1 wesentliche merkmale ? speziell geeignet fr anwendungen im bereich von 350 nm bis 1100 nm sperrstromarm (typ. 5 pa) to-18, bodenplatte, mit klarem epoxy-gie?harz anwendungen belichtungsmesser, belichtungsautomaten typ type bestellnummer ordering code bpx 63 q62702-p55 features especially suitable for applications from 350 nm to 1100 nm low reverse current (typ. 5 pa) to-18, base plate, transparent epoxy resin lens applications exposure meters, automatic exposure timers
2001-02-21 2 bpx 63 grenzwerte maximum ratings bezeichnung parameter symbol symbol wert value einheit unit betriebs- und lagertemperatur operating and storage temperature range t op ; t stg ? 40 ? + 80 c l ? ttemperatur (l ? tstelle 2 mm vom geh ? use entfernt bei l ? tzeit t 3 s) soldering temperature in 2 mm distance from case bottom ( t 3 s) t s 230 c sperrspannung reverse voltage v r 7v verlustleistung, t a = 25 c total power dissipation p tot 200 mw kennwerte ( t a = 25 c, normlicht a, t = 2856 k) characteristics ( t a = 25 c, standard light a, t = 2856 k) bezeichnung parameter symbol symbol wert value einheit unit fotoempfindlichkeit, v r = 5 v spectral sensitivity s 10 ( 8) na/ix wellenl ? nge der max. fotoempfindlichkeit wavelength of max. sensitivity s max 800 nm spektraler bereich der fotoempfindlichkeit s = 10% von s max spectral range of sensitivity s = 10% of s max 350 ? 1100 nm bestrahlungsempfindliche fl ? che radiant sensitive area a 0.97 mm 2 abmessung der bestrahlungsempfindlichen fl ? che dimensions of radiant sensitive area l b l w 0.985 0.985 mm mm abstand chipoberfl ? che zu geh ? useoberfl ? che distance chip front to case surface h 0.2 ? 0.8 mm halbwinkel half angle ? 75 grad deg. dunkelstrom, v r = 1 v dark current i r 5 ( 20) pa nullpunktsteilheit, e = 0 zero crossover s 0 0.4 pa/mv
bpx 63 2001-02-21 3 spektrale fotoempfindlichkeit, = 850 nm spectral sensitivity s 0.50 a/w quantenausbeute, = 850 nm quantum yield 0.73 electrons photon leerlaufspannung, e v = 1000 ix open-circuit voltage v o 450 ( 380) mv kurzschlu ? strom, e v = 1000 ix short-circuit current i sc 10 a anstiegs- und abfallzeit des fotostromes rise and fall time of the photocurrent r l = 1 k ?; v r = 5 v; = 850 nm; i p = 10 a t r , t f 1.3 s durchla ? spannung, i f = 100 ma, e = 0 forward voltage v f 1.3 v kapazit ? t, v r = 0 v, f = 1 mhz, e = 0 capacitance c 0 100 pf temperaturkoeffizient von v o temperature coefficient of v o tc v ? 2.6 mv/k temperaturkoeffizient von i sc temperature coefficient of i sc tc i 0.16 %/k rausch ? quivalente strahlungsleistung noise equivalent power v r = 1 v, = 850 nm nep 2.5 10 ? 15 nachweisgrenze, v r = 1 v, = 850 nm detection limit d* 3.9 10 13 kennwerte ( t a = 25 c, normlicht a, t = 2856 k) characteristics ( t a = 25 c, standard light a, t = 2856 k) (cont ? d) bezeichnung parameter symbol symbol wert value einheit unit w hz ----------- - cm hz w --------------------------
bpx 63 2001-02-21 4 relative spectral sensitivity s rel = f ( ) dark current i r = f ( v r ), e = 0 directional characteristics s rel = f ( ? ) ohf00062 0 rel s 400 600 800 1000 1200 20 40 60 80 % 100 nm photocurrent i p = f ( e v ), v r = 5 v open-circuit voltage v o = f ( e v ) capacitance c = f ( v r ), f = 1 mhz, e = 0 total power dissipation p tot = f ( t a ) dark current i r = f ( t a ), e v = 0 v, v r = 1 v
bpx 63 2001-02-21 5 ma?zeichnung package outlines ma ? e werden wie folgt angegeben: mm (inch) / dimensions are specified as follows: mm (inch). published by osram opto semiconductors gmbh & co. ohg wernerwerkstrasse 2, d-93049 regensburg ? all rights reserved. attention please! the information describes the type of component and shall not be considered as assured characteristics. terms of delivery and rights to change design reserved. due to technical requirements components may contain dangerous substances. for information on the types in question please contact our sales organization. packing please use the recycling operators known to you. we can also help you ? get in touch with your nearest sales office. by agreement we will take packing material back, if it is sorted. you must bear the costs of transport. for packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. components used in life-support devices or systems must be expressly authorized for such purpose! critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of osram os. 1 a critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. if they fail, it is reasonable to assume that the health of the user may be endangered. ? 4.3 (0.169) ? 4.1 (0.161) chip position 3.6 (0.142) 3.0 (0.118) 2.54 (0.100) spacing gety6625 1 anode cathode (sfh 483) (ld 242, bpx 63, sfh 464) 14.5 (0.571) 12.5 (0.492) ? 0.45 (0.018) 2.7 (0.106) 0.9 (0.035) 1.1 (0.043) 0.9 (0.035) 1.1 (0.043) ? 5.5 (0.217) ? 5.2 (0.205)
|
